A boat like 4Recovery needs to be right. Technically, practically and down to the details. At sea, you do not want to be thinking about dirt left in a diesel tank or another fault that might jeopardise a safe passage. So the past year was about doing, not planning.
To get an overview, last week I put together a tidy file of what has been done and what still needs doing. Leo and I have done an enormous amount of work together, and I am deeply grateful to him. From windvane steering to engine maintenance, from stove to autopilot and from dinghy to exhaust hose. Looking at the list, I feel satisfaction and a certain pride, and very slowly the list is getting shorter. Boxes are being ticked, and I am becoming more and more familiar with the boat. Through all these jobs, I now know every nook and cranny and have had almost every part in my hands. I have inspected, checked, cleaned, assessed, repaired and replaced things where needed, bringing 4Recovery back into excellent condition and preparing her to do what a boat is meant to do: travel, sail and explore unfamiliar destinations far beyond the horizon.
What has been done on 4Recovery recently
1. Safety & navigation — Navigation lights, VHF radios, AIS and depth sounder checked and repaired — Lifesaving equipment, lifelines and emergency provisions checked — Hydrovane windvane steering overhauled
2. Engine & propulsion — Diesel tank thoroughly cleaned — High-pressure pump repaired (diesel leak fixed) — Filters, hoses, greaser, propeller shaft and relays replaced or checked — Exhaust hose renewed — Fuel gauge installed — Engine compartment organised and cleaned
3. Electrical system — Complete wiring diagram mapped out — New battery bank fitted (service and starter batteries) — Cytrix relay installed — Chartplotters, Raymarine network and NMEA connections made operational — Interior and exterior lighting repaired
4. Sails & deck equipment — Sails checked and selected — Running rigging replaced — Winches, headsail furler and fittings serviced — Anchor windlass checked — Non-slip surfaces and deck details attended to
5. Heating & comfort — Diesel heaters fitted — Refleks stove installed (being completed) — Air ducts and pipes renewed — Interior rearranged for extended stays
6. Dinghy & equipment — Davits built — Outboard serviced — Dinghy sealed, fitted out and completed
7. Interior & everyday use — Floors, ceilings and lighting renewed — Mattresses cut to size — Upholstery washed and adapted — Small office workspace built and furnished
8. Underwater hull & hull — Boat hauled out — Anodes replaced — Seacocks checked and unused ones permanently sealed — Coppercoat activated — Hull inspected and cleaned

